2020. 2. 18. 20:26ㆍ카테고리 없음
Rosewood Diesel tool kit to remove and install injector sleeves/cups without pulling engine heads for the 7.3L Power Stroke and Navistar T444E engines. These Sleeve Tools are 100% Made in the USA using USA materials!The 7.3L Power Stroke injectors sit in a brass sleeve that separates the injector, and fuel, from the engine's coolant. These brass sleeves weaken and fatigue from age and tend to split and fail. A common symptom is finding fuel in your cooling system.
This happens because the fuel system typically operates at around 60 psi of pressure, whereas the coolant system operates at a much lower pressure so the fuel gets pumped into the coolant when the sleeve fails and cracks.We offer these custom made tools to simplify the changing of the sleeves. By design, the tools are shorter than an injector so you can change the sleeves with the heads on the motor and the motor still in the truck since there is no slide hammer required like with some other sleeve tools. These tools are Black Oxide Solid Steel for long life. You can replace your sleeves as preventative maintenance now, or replace them later once you detect signs of failure. Currently 4/5 StarsReviewed by: Seung 06:36AMProduct ownership: Less than 1 weekPurchased from: KT PerformanceComments:I ordered this for my 2001 F250 7.3l Powerstroke.
Nicely packaged and came very well laid out. My only complaint is that the removal tool seems a little weak, the threads on the tap will actually flatten or be completely shredded and smoothed so you can't remove a cup.
This happened to me on my last injector cup and was frustrating getting it to thread slightly.
Dt466e Injector Sleeve Tool Box
Requirements to use this website:. Operating System: No minimum requirements. Hardware: Site can be accessed from any device capable of supporting a web browser with the minimum requirements detailed below.
Maxxforce Injector Cup Tool
Browser: Must support TLS 1.2. Cookies: Please see Cookie Policy page - link is available on the bottom of this page. Forgot password: Please use 'Forgot Password' link on the Login page.Third Party Licenses:This site is powered by SMC, Snap-on's proprietary Channel Management Engine, with help from the following third party components. Each is shown with a link to their respective license agreement.